Your Coyote engine or Chevy LS powerplant may be the star of the show, but your vehicle’s engine block cooling system plays a critical behind-the-scenes role.
In all cars, a failing cooling system can ruin your day – and your budget. But in high-performance vehicles, especially, paying attention to maintenance is key. Proper care and using the right parts in your cooling system can prevent overheating, extend the life of your engine, and protect your investment.
Overheating can be a significant concern during track days or long drives, especially if your cooling system maintenance is overdue, or if you’ve installed engine modifications like superchargers that lower your 60-foot time but increase heat production.
High-performance vehicles require specific attention, particularly under demanding conditions. Upgrades like high-performance radiators or auxiliary cooling fans are popular for both Camaros and Mustangs. And for those with vintage cars, modern upgrades like a cross-flow radiator can bring your ride into the 21st century, allowing it to handle the extra heat generated by a souped-up engine.
In this article, we’ll cover essential maintenance steps that will help you spot any trouble early. We’ll answer questions like:
- How can I improve my engine cooling performance?
- How do I keep my engine from overheating?
- How do I keep my engine running cooler?
We’ll also look at a few cooling system upgrades that many drivers consider, especially when doing a swap to a more powerful engine.
How To: Engine Block Cooling
Your car’s coolant is the first line of defense against overheating. This vital fluid regulates the engine’s temperature by circulating through the system to absorb heat. Keeping your coolant levels in check – and replacing old fluid – is the first step to prevent your engine from running too hot.
Steps to Check Coolant Levels
- Let your engine cool first: It is dangerous to open the radiator cap or coolant reservoir when the engine is hot.
- Locate the coolant reservoir: It’s usually a clear tank near the front of the engine bay.
- Check the levels: If the coolant level is below the minimum line, it’s time to top off.
- Use the correct coolant: Always use the coolant recommended for your specific engine. For high-performance engines like the Coyote or LT4, using the right mix (often 50/50 water and antifreeze) ensures optimal performance.
This isn’t the place to experiment or try to save money: Using the correct coolant for your vehicle is essential. High-performance engines like the LT4 and Coyote generate more heat than standard models. The wrong type of coolant can lead to poor heat dissipation and even irreparable internal engine damage.
How Do You Maintain an Engine Cooling System?
Beyond topping off fluids, you’ll also need to perform regular maintenance tasks to keep your engine cooling system running efficiently.
Flush and Replace Coolant Regularly
Over time, coolant degrades due to contaminants. This loss of efficiency makes the fluid less effective at managing heat from the engine. Flushing your cooling system and replacing the coolant ensures that your engine remains properly protected.
Recommended intervals: Follow the manufacturer’s maintenance schedule for coolant flushes. If you’ve installed engine mods like a supercharger or use your car in high-stress environments (like the track), you may need more frequent drain-and-fill or coolant flushes. A general rule of thumb is to flush your cooling system every 30,000 miles or as directed by your auto manufacturer or mechanic.
Steps to Flush and Refill Coolant
- Drain the old coolant from the radiator.
- Use a radiator flush product to clean out any contaminants.
- Refill with the recommended coolant mix, ensuring that any air pockets are removed.
Inspect the Radiator
A car’s radiator dissipates the heat absorbed by the coolant. Over time, debris, rust, or bent fins reduce its effectiveness, which can lead to overheating.
Signs of a Clogged or Damaged Radiator
- Overheating: One of the first signs your radiator isn’t working properly is when your temperature gauge or sensor is in the red zone.
- Leaking coolant: Check for puddles under your vehicle, which can demonstrate a leak.
- Bent or clogged fins: Debris can get lodged in the radiator fins, reducing airflow.
To maintain your radiator’s performance regularly inspect the radiator for debris, rust, or damage. You can use compressed air or a soft brush to clean out debris caught in the fins.
Monitor for Leaks
Leaks in the cooling system are common, especially in high-performance vehicles, and leaks can cause a significant drop in cooling efficiency. Catching leaks early can prevent costly repairs and protect your engine.
Common Places for Leaks
- Hoses: Over time, hoses can crack or become loose. Check clamps and connections regularly. Ensure hoses are secure and free of cracks.
- Water pump: A failing water pump can cause leaks or reduce coolant flow, leading to overheating. Listen for unusual noises, and check for any coolant leaks, especially around seals.
- Radiator: Look for signs of corrosion, especially in older vehicles or cars driven in harsh conditions.
While inspecting for leaks and weak hoses, double-check the function of your cooling fan – electric or an auxiliary cooling fan.
How Do I Keep My Engine Running Cooler?
Sometimes normal maintenance won’t meet every need of your vehicle. This is true, especially, if you’re restoring an older vehicle or adding performance upgrades, which could change your engine configuration or generate more heat overall.
If you’re upgrading or swapping engines — such as installing a modern Coyote engine into a Fox Body Mustang — you’ll likely need to upgrade your cooling system as well. The Coyote engine is larger and more powerful than older pushrod engines, which means it generates more heat. The same is true if you’re looking at putting a newer LS engine in a Gen 1 Camaro.
A larger, high-performance radiator and an upgraded cooling fan are must-haves in these scenarios. These components can handle the increased cooling demand, ensuring your engine stays at a safe operating temperature, even under pressure.
For example, vintage Mustangs often require a cross-flow radiator, which allows for better heat dissipation and helps maintain cooler operating temperatures during high-stress drives.
At Wade’s Motorsports, we’re ready to talk all things cooling systems and engine swaps to help you find the right OEM parts for your Mustang, Camaro, or F-150. Choosing high-quality aftermarket or OEM parts, like radiators and cooling fans, is critical for ensuring proper fitment and long-term durability. We offer a wide selection of cooling system parts, including Mustang and Camaro radiators, cooling fans, and OEM components. Call or email us today and check out our online inventory!